MatsDirect UK Ltd

Quality corporate matting suppliers

Electrical Safety Matting

Electrical Insulating Switchboard Safety Matting

Over the last 25 years we’ve built up a huge amount of trust with our safety matting customers, based on integrity and the high quality of our certified electrical rubber floor matting products.

One of the main areas where that’s crucially important is with our electrical safety matting solutions, when purchasing exactly the right rubber flooring safety product can literally be the difference between life and death.

Today, we’re trusted by many blue chip companies in the oil, gas and shipping industries to supply them with the highest quality electrical safety shock proof floor matting. Over the years we’ve successfully exported electrical rubber switchboard matting to over 20 countries worldwide.

Including Nigeria Africa oil, Singapore Vasco, Alaska Conoco,Qatar oil & gas, Kuwait oil Indonesia, Siemensl Netherlands, Geordick shipping and of course many UK wholesale distributors.

High quality Rubber electrical safety floor matting:

Whether your requirement is for a single bespoke size safety floor mat or you require to cover whole switchboard floor rooms we will ensure your requirement is met in the most economical way.

Our experienced team are happy to discuss the best rubber mats or rubber flooring product for your specific situation with you, to prevent any risks of electrical shocks or accidents

Unsure about which earthing matting is required for your application?

Call one of our electrical matting specialists to find out on +44 (0)161 797 6785 or email sales@matsdirect.co.uk and get the right advice.

 

Filter products by:
Electrosafe IEC61111 Class 0 Electrical Rubber Safety Matting

Electrosafe IEC61111 Class 0 Electrical Rubber Safety Matting (MD570)

Electrosafe electrical switchboard matting is tested and stamped to IEC 61111 Class 0. It is 7.5Kv tested and has a 1Kv working voltage.

It is an extremely high specification quality natural rubber compound safety carpet product and is able to withstand the following: dielectric test 7,500v, surface proof test 5,000v, working voltage 1,000v. This is commonly used now as the replacement for the old BS921 specification 9.5mm thick electrical rubber matting product.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe IEC61111 Class 1 Electrical Rubber Safety Matting

Electrosafe IEC61111 Class 1 Electrical Rubber Safety Matting (MD571)

Electrosafe electrical Rubber insulating matting is tested and stamped to IEC 61111 Class 1. It is 15Kv tested and has a 7.5Kv working voltage.

It is an extremely high specification quality natural rubber compound floor safety matting product and is able to withstand the following: dielectric test 15,000v, surface proof test 10,000v, working voltage 7,500v. Grounding mats like this one are ideal for working on live switchboard apparatus.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe IEC61111 Class 2 Electrical Rubber Safety Matting

Electrosafe IEC61111 Class 2 Electrical Rubber Safety Matting (MD572)

Electrosafe electrical switchboard matting is tested and stamped to IEC 61111 Class 2. It is 30Kv tested and has a 17Kv working voltage. This product is stamped along the whole length of the matting with the relevant IEC information.

It is an extremely ultra-high specification quality natural rubber compound safety matting product and is able to withstand the following: dielectric test 30,000v, surface proof test 20,000v, working voltage 17,000v. This matting allows for working on live electrical panels when carrying out essential maintenance in safety.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe IEC61111 Class 3 Electrical Rubber Safety Matting

Electrosafe IEC61111 Class 3 Electrical Rubber Safety Matting (MD573)

Electrosafe electrical earthing switchboard safety matting is tested and stamped all along the length of the matting to IEC 61111 Class 3. It is 40Kv tested and has a 26.5Kv working voltage. It is an extremely ultra-high specification quality natural rubber compound safety matting product able to withstand the following: dielectric test 40,000v, surface proof test 30,000v, working voltage 26,500v.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe IEC61111 Class 4 Electrical Rubber Safety Matting

Electrosafe IEC61111 Class 4 Electrical Rubber Safety Matting (MD574)

Electrosafe rubber electrical switchboard safety matting is tested and stamped to IEC 61111 Class 4 specification. It is 50Kv tested and has a 36Kv working voltage. It is an ultra-high specification quality natural rubber compound electrical safety matting product that is able to withstand the following: dielectric test 50,000v, surface proof test 40,000v, working voltage 36,000v.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe 450v 3 Phase Electrical Rubber Safety Matting

Electrosafe 450v 3 Phase Electrical Rubber Safety Matting (MD551)

Electrosafe rubber switchboard safety matting is 450v general-purpose electrical safety matting. It is tested to 11Kv and has a 450v working voltage.

This matting is a fully tested general-purpose electrical switchboard matting when working on a 3 phase switchboard or allied equipment.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe 650v BS921 Electrical Rubber Safety Matting

Electrosafe 650v BS921 Electrical Rubber Safety Matting (MD550)

Electrosafe electrical switchboard rubber matting (BS EN 921) is a 15kv tested 650v working voltage rubber grounding matting.

This electrical safety matting is fully tested in accordance with BS921/1976 British Standard. Its robust 9.5mm mat has been the mainstay for switch rooms since 1954 and is fully labelled and stamped along with certificates of conformity to ensure a safe working mat.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe ASTM D178 Class 1 Electrical Rubber Safety Matting

Electrosafe ASTM D178 Class 1 Electrical Rubber Safety Matting (MD552)

Electrosafe rubber electrical switchboard matting (ASTM D178 Type 1 Class 1) are 20Kv tested and have a 7.5Kv working voltage.

It is fully tested to the following: dielectric test 20,000v, surface proof test 10,000v, working voltage 7,500v. It is a black, shockproof, electrical safety rubber matting made using the finest quality rubber compounds to ensure workers receive the best protection possible when working with live electricity.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe ASTM D178 Class 2 Electrical Rubber Safety Matting

Electrosafe ASTM D178 Class 2 Electrical Rubber Safety Matting (MD553)

Electrosafe electrical rubber switchboard matting (ASTM D178 Type 1 Class 2) are 30Kv tested and have a 17Kv working voltage.

It is fully tested to the following: dielectric test 30,000v, surface proof test 20,000v, working voltage 17,000v. It is used for preventing injury to electricians during work carried out on high or low voltage electrical supply panels - an insulation mat needs to be provided to conform to current health & safety regulations.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe ASTM D178 Class 3 Electrical Rubber Safety Matting

Electrosafe ASTM D178 Class 3 Electrical Rubber Safety Matting (MD554)

Electrosafe electrical rubber switchboard matting (ASTM D178 Type 1 Class 3) are 40Kv tested and have a 26Kv working voltage stamped along the full length of the mat.

It is fully tested to the following: dielectric test 40,000v, surface proof test 30,000v, working voltage 26,000v. This electrical switchboard safety rubber matting is required for insulating operatives from shocks when working on electrical equipment.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe ASTM D178 Class 4 Electrical Rubber Safety Matting

Electrosafe ASTM D178 Class 4 Electrical Rubber Safety Matting (MD555)

Electrosafe electrical switchboard matting (ASTM D178 Type 1 Class 4) are 50Kv tested and have a 36Kv working voltage.

It is fully tested to the following: dielectric test 50,000v, surface proof test 40,000v, working voltage 36,000v. This heavy-duty durable rubber electrical safety matting is ideal for work in harsh high voltage grounding operational environments where safety is paramount when working on switchboard equipment and a grounding mat is vital.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe ASTM D178 Class 5 Electrical Rubber Safety Matting

Electrosafe ASTM D178 Class 5 Electrical Rubber Safety Matting (MD557)

Electrosafe electrical switchboard safety matting (ASTM D178 Type 1 Class 5) are 20Kv tested and have a 7.5Kv working voltage. It is fully tested to the following: dielectric test 20,000v, surface proof test 10,000v, working voltage 7,500v.

This Class 5 substation earth mat is a very high quality electrical earthing floor mat to ensure safety during operations on switchboard equipment.

All Electrosafe Floor matting safety products are stamped with the relevant specification along the whole length of the roll.

VIEW PRODUCT Downloads available
Electrosafe VDEO 303 Earthing Safety Matting

Electrosafe VDEO 303 Earthing Safety Matting (MD580)

Electrosafe VDEO 303 Certification.

An extremely ultra-high specification quality natural rubber compound electrical safety matting product able to withstand the following:

Dielectric test: 50,000v

Working voltage: 1,000v

VIEW PRODUCT Downloads available
Tripsafe Cable Floor Safety Mat

Tripsafe Cable Floor Safety Mat (MD401)

Cable floor safety mats cover trailing wires and cables in an open area to help to create a safe area where people can travel over the cables in safety. This ensures a safe passage for personnel and helps keep the floor area tidy. Simply collect the wires together and fasten with a wire tie so they lay flat to the floor and place them flat under the mat tunnel and they will be kept in place and reduce the risk of any tripping accidents.

 

VIEW PRODUCT Downloads available
Electrical Safety Matting

Learn More About Electrosafe HV/LV Electrical Safety Switchboard Matting From The Mat Man

 

Frequently Asked Questions

Is thickness an important factor in electrical matting?

Thickness is determined by the mat specification. The authorisation body determines what the thickness of the matting is to meet the paticular specification.

The thickness therefore does not necessarily mean the thicker the matting the higher the protection in working voltage terms.

Which way up do I use Electrical safety matting?

It is best to have the flutes or textured surface uppermost to use the anti-slip benefit however you can use the side with the identity marking on if you wish it makes no difference to the capability aspect of the matting.

Is the matting compliant with relevant safety standards such as ASTM D178, IEC 61111, or other local regulations?

YES! All electrical safety matting must be tested by an independent authority who then issues the compliant certificate for the product.

How is it designed to insulate and protect workers from electrical shocks?

By creating a barrier between the live equipment and earth.

The specific voltage levels that you can use within the facility will be determined by the equipment.
 

How durable and resistant is the matting?

This is dependant on the product - please contact us if you need help or advice with this.

What is the expected lifespan of the product?

Depending on traffic however any signs of wear should be investigated for possible replacement.

Are there customization options, such as color or surface texture, that match the requirements or preferences of the facility?

No as the matting has to be tested to conform to it’s required specification and can therefore not be altered from that particular test procedure.

How is the matting installed?

By laying it in front of the equipment on the floor!

Are there specific cleaning procedures or periodic testing needed to ensure that the matting continues to provide adequate protection over time?

Cleaning by brush and would only require testing if it had been subject to a discharged electric current.

Can’t find what you’re looking for?

CONTACT US
REQUEST A CALL BACK

ISO 9001:2015 (Quality Management System) Accredited

MatsDirect UK Ltd are fully accredited for the ISO 9001:2015 (Quality Management System) standard which demonstrates our ability to consistently provide our products and services that meet our customer's applicable statutory and regulatory requirements.

ISO 9001:2015 also aims to enhance customer satisfaction through the effective application of the system including processes for improvement.

Back to top